Confining Polymer Electrolyte in MOF for Safe and High-Performance All-Solid-State Sodium Metal Batteries.

Nanoconfined polymer molecules exhibit profound transformations in their properties and behaviors. Here, we present the synthesis of a polymer-in-MOF single ion conducting solid polymer electrolyte, where polymer segments are partially confined within nanopores ZIF-8 particles through Lewis acid-base interactions for solid-state sodium-metal batteries (SSMBs). The unique nanoconfinement effectively weakens Na ion coordination with the anions, facilitating the Na ion dissociation from salt. Simultaneously, the well-defined nanopores within ZIF-8 particles provide oriented and ordered migration channels for Na migration. As a result, this pioneering design allows the solid polymer electrolyte to achieve a Na ion transference number of 0.87, Na ion conductivity of 4.01×10-4 S cm-1, and an extended electrochemical voltage window up to 4.89 V vs. Na/Na+. The assembled SSMBs (with Na3V2(PO4)3 as the cathode) exhibit dendrite-free Na-metal deposition, promising rate capability, and stable cycling performance with 96 % capacity retention over 300 cycles. This innovative polymer-in-MOF design offers a compelling strategy for advancing high-performance and safe solid-state metal battery technologies.

A Deeper Understanding of Metal Nucleation and Growth in Rechargeable Metal Batteries Through Theory and Experiment.

Lithium and sodium metal batteries continue to occupy the forefront of battery research. Their exceptionally high energy density and nominal voltages are highly attractive for cutting-edge energy storage applications. Anode-free metal batteries are also coming into the research spotlight offering improved safety and even higher energy densities than conventional metal batteries. However, uneven metal nucleation and growth which leads to dendrites continues to limit the commercialisation of conventional and anode-free metal batteries alike. This review connects models and theories from well-established fields in metallurgy and electrodeposition to both conventional and anode-free metal batteries. These highly applicable models and theories explain the driving forces of uneven metal growth and can inform future experiment design. Finally, the models and theories that are most relevant to each anode-related cell component are identified. Keeping these specific models and theories in mind will assist with rational design for these components.

Solvent-derived Fluorinated Secondary Interphase for Reversible Zn-graphite Dual-ion Batteries.

The irreversibility of anion intercalation-deintercalation is a fundamental issue in determining the cycling stability of a dual-ion battery (DIB). In this work, we demonstrate that using a partially fluorinated carbonate solvent can drive a beneficial fluorinated secondary interphase layer formation. Such layer facilitates reversible anion (de-)intercalation processes by impeding solvent molecule co-intercalation and the associated graphite exfoliation. The enhanced reversibility of anion transport contributes to the overall cycling stability for a Zn-graphite DIB-a high Coulombic efficiency of 98.5 % after 800 cycles, with an attractive discharge capacity of 156 mAh g-1 and a mid-point discharge voltage of ≈1.7 V (at 0.1 A g-1 ). In addition, the formed fluorinated secondary interphase suppresses the self-discharge behavior, preserving 29 times of the capacity retention rate compared to the battery with a commonly used carbonate solvent, after standing for 24 hours. This work provides a simple and effective strategy for addressing the critical challenges in graphite-based DIBs and contributes to fundamental understanding to help accelerate their practical application.

Recent Progress on Two-Dimensional Carbon Materials for Emerging Post-Lithium (Na+, K+, Zn2+) Hybrid Supercapacitors.

The hybrid ion capacitor (HIC) is a hybrid electrochemical energy storage device that combines the intercalation mechanism of a lithium-ion battery anode with the double-layer mechanism of the cathode. Thus, an HIC combines the high energy density of batteries and the high power density of supercapacitors, thus bridging the gap between batteries and supercapacitors. Two-dimensional (2D) carbon materials (graphite, graphene, carbon nanosheets) are promising candidates for hybrid capacitors owing to their unique physical and chemical properties, including their enormous specific surface areas, abundance of active sites (surface and functional groups), and large interlayer spacing. So far, there has been no review focusing on the 2D carbon-based materials for the emerging post-lithium hybrid capacitors. This concept review considers the role of 2D carbon in hybrid capacitors and the recent progress in the application of 2D carbon materials for post-Li (Na+, K+, Zn2+) hybrid capacitors. Moreover, their challenges and trends in their future development are discussed.

A P3-Type K1/2Mn5/6Mg1/12Ni1/12O2 Cathode Material for Potassium-Ion Batteries with High Structural Reversibility Secured by the Mg-Ni Pinning Effect.

Mn-based layered oxides are very attractive as cathodes for potassium-ion batteries (PIBs) due to their low-cost and environmentally friendly precursors. Their transfer to practical application, however, is inhibited by some issues including consecutive phase transitions, sluggish K+ deintercalation/intercalation, and serious capacity loss. Herein, Mg-Ni co-substituted K1/2Mn5/6Mg1/12Ni1/12O2 is designed as a promising cathode material for PIBs, with suppressed phase transitions that occurred in K1/2MnO2 and improved K+ storage performance. Part of Mg2+ and Ni2+ occupies the K+ layer, playing the role of a "nailed pillar", which restrains metal oxide layer gliding during the K+ (de)intercalation. The "Mg-Ni pinning effect" not only suppresses the phase transitions but also reduces the cell volume variation, leading to the improved cycle performance. Moreover, K1/2Mn5/6Mg1/12Ni1/12O2 has low activation barrier energy for K+ diffusion and high electron conductivity as demonstrated by first-principles calculations, resulting in better rate capability. In addition, K1/2Mn5/6Mg1/12Ni1/12O2 also delivers a higher reversible capacity owing to the participation of the Ni element in electrochemical reactions and the pseudocapacitive contribution. This study provides a basic understanding of structural evolution in layered Mn-based oxides and broadens the strategic design of cathode materials for PIBs.

Ultrathin 2D Mesoporous TiO2 /rGO Heterostructure for High-Performance Lithium Storage.

Lithium-ion batteries (LIBs) have been widely applied and studied as an effective energy supplement for a variety of electronic devices. Titanium dioxide (TiO2 ), with a high theoretical capacity (335 mAh g-1 ) and low volume expansion ratio upon lithiation, has been considered as one of the most promising anode materials for LIBs. However, the application of TiO2 is hindered by its low electrical conductivity and slow ionic diffusion rate. Herein, a 2D ultrathin mesoporous TiO2 /reduced graphene (rGO) heterostructure is fabricated via a layer-by-layer assembly process. The synergistic effect of ultrathin mesoporous TiO2 and the rGO nanosheets significantly enhances the ionic diffusion and electron conductivity of the composite. The introduced 2D mesoporous heterostructure delivers a significantly improved capacity of 350 mAh g-1 at a current density of 200 mA g-1 and excellent cycling stability, with a capacity of 245 mAh g-1 maintained over 1000 cycles at a high current density of 1 A g-1 . The in situ transmission electron microscopy analysis indicates that the volume of the as-prepared 2D heterostructures changes slightly upon the insertion and extraction of Li+ , thus contributing to the enhanced long-cycle performance.

Correction to: Responses of Microbial Community to Di-(2-ethylhcxyl) Phthalate Contamination in Brown Soil.

In the original publication of the article, there was an error in the abstract section. The incorrect sentence "the dominant microbes in the DEHP-contaminated soil were Sphingomonas and Bacillus, which belonged to the Acidobacteria and Proteobacteriav, respectively" should be revised to "the dominant microbes in the DEHP-contaminated soil were belonged to the Acidobacteria and Proteobacteria, respectively." This has been corrected with this erratum.

Responses of Microbial Community to Di-(2-ethylhcxyl) Phthalate Contamination in Brown Soil.

Di-(2-ethylhcxyl) phthalate (DEHP) is applied as plasticizer, which results in the pollution of environment. In this study, the effects of DEHP on soil microbial functions, structure and genetic diversity were investigated. The concentration of DEHP in the soil were 0, 0.1, 1, 10 and 50 mg/kg, and the experimental period were 28 days. DEHP reduced the quantity, abundance, species dominance and homogeneity of soil microbes during the first 14 days. In addition, microbial utilization efficiency of carbon (carbohydrates, aliphatics, amino acids, metabolites) was impacted after 28 days, though the effects gradually weakened. Based on denaturing gradient gel electrophoresis and clone library analysis, in the presence of DEHP, the dominant microbes in the DEHP-contaminated soil were Sphingomonas and Bacillus, which belonged to the Acidobacteria and Proteobacteriav, respectively. With 0.1 or 1 mg/kg of DEHP, the relative abundances of Acidobacteria were higher, and with 10 or 50 mg/kg of DEHP, the relative abundances of Proteobacteria were higher.

A High-Kinetics Sulfur Cathode with a Highly Efficient Mechanism for Superior Room-Temperature Na-S Batteries.

Applications of room-temperature-sodium sulfur (RT-Na/S) batteries are currently impeded by the insulating nature of sulfur, the slow redox kinetics of sulfur with sodium, and the dissolution and migration of sodium polysulfides. Herein, a novel micrometer-sized hierarchical S cathode supported by FeS2 electrocatalyst, which is grown in situ in well-confined carbon nanocage assemblies, is presented. The hierarchical carbon matrix can provide multiple physical entrapment to polysulfides, and the FeS2 nanograins exhibit a low Na-ion diffusion barrier, strong binding energy, and high affinity for sodium polysulfides. Their combination makes it an ideal sulfur host to immobilize the polysulfides and achieve reversible conversion of polysulfides toward Na2 S. Importantly, the hierarchical S cathode is suitable for large-scale production via the inexpensive and green spray-drying method. The porous hierarchical S cathode offers a high sulfur content of 65.5 wt%, and can deliver high reversible capacity (524 mAh g-1 over 300 cycles at 0.1 A g-1 ) and outstanding rate capability (395 mAh g-1 at 1 A g-1 for 850 cycles), holding great promise for both scientific research and real application.

2D Titania-Carbon Superlattices Vertically Encapsulated in 3D Hollow Carbon Nanospheres Embedded with 0D TiO2 Quantum Dots for Exceptional Sodium-Ion Storage.

Two-dimensional (2D) superlattices offer promising technological opportunities in tuning the intercalation chemistry of metal ions. Now, well-ordered 2D superlattices of monolayer titania and carbon with tunable interlayer-spacing are synthesized by a molecularly mediated thermally induced approach. The 2D superlattices are vertically encapsulated in hollow carbon nanospheres, which are embedded with TiO2 quantum dots, forming a 0D-2D-3D multi-dimensional architecture. The multi-dimensional architecture with the 2D superlattices encapsulated inside exhibits a near zero-strain characteristic and enriched electrochemical reactivity, achieving a highly efficient Na+ storage performance with exceptional rate capability and superior long-term cyclability.

Phosphorus-Modulation-Triggered Surface Disorder in Titanium Dioxide Nanocrystals Enables Exceptional Sodium-Storage Performance.

Structural modulation and surface engineering have remarkable advantages for fast and efficient charge storage. Herein, we present a phosphorus modulation strategy which simultaneously realizes surface structural disorder with interior atomic-level P-doping to boost the Na+ storage kinetics of TiO2 . It is found that the P-modulated TiO2 nanocrystals exhibit a favourable electronic structure, and enhanced structural stability, Na+ transfer kinetics, as well as surface electrochemical reactivity, resulting in a genuine zero-strain characteristic with only approximately 0.1 % volume variation during Na+ insertion/extraction, and exceptional Na+ storage performance including an ultrahigh rate capability of 210 mAh g-1 at 50 C and a strong long-term cycling stability without significant capacity decay up to 5000 cycles at 30 C.

The Effect of Boron Doping on Structure and Electrochemical Performance of Lithium-Rich Layered Oxide Materials.

Polyanion doping shows great potential to improve electrochemical performance of Li-rich layered oxide (LLO) materials. Here, by optimizing the doping content and annealing temperature, we obtained boron-doped LLO materials Li1.2Mn0.54Ni0.13Co0.13BxO2 (x = 0.04 and 0.06) with comprehensively improved performance (94% capacity retention after 100 cycles at 60 mA/g current density and a rate capability much higher compared to that of the pristine sample) at annealing temperatures of 750 and 650 °C, respectively, which are much lower than the traditional annealing temperature of similar material systems without boron. The scenario of the complex crystallization process was captured using Cs-corrected high-angle annular dark field scanning transmission electron microscopic (HAADF-STEM) imaging techniques. The existence of layered, NiO-type, and spinel-like structures in a single particle induced by boron doping and optimization of annealing temperature is believed to contribute to the remarkable improvement of cycling stability and rate capability.